Todas las tecnologías de impresión 3D fabrican piezas capa por capa.
Con las impresoras SLS y MJF, estas capas a veces pueden ser seleccionadas por el usuario, pero normalmente la configuración del grosor de la capa la define el proveedor de servicios de impresión.
La razón de esto es que a veces no es eficiente ofrecer diferentes espesores de capa para estas tecnologías, ya que los sistemas deben fabricar varias piezas a la vez, lo que dificulta la optimización de los procesos de producción.
FDM however is different, as it can be efficient to manufacture single parts. With FDM printing we are able to offer four different layer options, depending on the material selected, ranging from 0.127mm to 0.333mm. Typically SLS and MJF systems have set layer thicknesses between 0.08mm and 0.12mm.
Selecting layer thickness not only affects the appearance of the part, but it also affects performance. A lower layer thickness will give a smoother surface finish, however as there are more layers in the part the strength will be weaker than a part build with a higher layer thickness. Typically a mid range layer thickness gives a good balance between surface finish and strength.
Puede encontrar más información sobre
