Bei allen 3D-Drucktechnologien werden Teile Schicht für Schicht hergestellt.
Bei SLS- und MJF-Druckern können diese Schichten manchmal vom Benutzer ausgewählt werden, normalerweise wird die Einstellung der Schichtdicke jedoch vom Druckdienstleister festgelegt.
Der Grund hierfür liegt darin, dass es manchmal ineffizient ist, für diese Technologien unterschiedliche Schichtdicken anzubieten, da die Systeme mehrere Teile gleichzeitig herstellen müssen, was eine Rationalisierung der Produktionsprozesse erschwert.
FDM however is different, as it can be efficient to manufacture single parts. With FDM printing we are able to offer four different layer options, depending on the material selected, ranging from 0.127mm to 0.333mm. Typically SLS and MJF systems have set layer thicknesses between 0.08mm and 0.12mm.
Selecting layer thickness not only affects the appearance of the part, but it also affects performance. A lower layer thickness will give a smoother surface finish, however as there are more layers in the part the strength will be weaker than a part build with a higher layer thickness. Typically a mid range layer thickness gives a good balance between surface finish and strength.
Mehr dazu finden Sie
